125X/Y,250X/Y Stainless Steel Structured Packing|Wire Mesh
Distillation Column Packing
Wire Mesh structured columns packing consist of proprietary designed metal wire mesh with corrugated
sheets which are aligned and placed vertically. The wire structures
slopes are reversed in other sheets stacked with alternating 90
degree orientation of each layer resulting in inclined flow
passages and a relatively high surface area. This allow thin liquid
films to be continuously spread across the tower as liquid flows
through the packing. Capillary action and high surface areas result
in maximum exposure to high mass transfer efficiency.
Good lateral distribution of liquid and gas.
Highest theoretical stages per meter of packed height.
Lower specific pressure drop per theoretical stage.
Less liquid hold up. Economic operating loads.
The wire mesh packing with high number of theoretical plates and
low pressure drop per meter. Small hold-up, most economical load
range: F factor 1.5— 2m/s kg/m3. Minimum liquid load approx: 0.2
SS 304, SS 316, SS 316L or any other metal at request.
Fine Chemical, Flavours, Isomers Separation. The separation of
thermally sensitive materials, Pilot and laboratory columns. Reform
existing columns for increased Performance. And system of
ethylbenzene / benzene second, hexamethylene kelone/ hexamethylene
mellow, oneself lactam. Absorb or regeneration tower.